Gameboy Classic: Professional IPS LCD-screen - 2.45GB No Lens

Direct delivery: This product ships directly from our supplier abroad with AliExpress Selection Standard Shipping. Professional IPS LCD screen for Game Boy Classic DMG – 2.45" with full customization This high-quality IPS LCD screen gives your classic Game Boy DMG a modern upgrade without needing cutting. Original format, plug-and-play installation. Main features: 2.45" TFT IPS display with extraordinary clarity 100-step brightness adjustment for perfect viewing in any lighting condition Save up to 7 custom color palettes Battery status display directly on the screen Pixel display mode for authentic Game Boy aesthetics Supports Danish, English, and Chinese menus Control dial – how to use it: 1 second: Show battery status 3 seconds: Choose from saved color settings 5+ seconds: Open advanced customization menu Push up/down: Adjust brightness (gentle or strong change on long press) Important installation guidelines: Never insert the cable backwards – risk of LCD chip damage Handle with care – avoid pinching or pulling the flat cable Apply insulating tape to the dial’s metal cap to prevent short circuits Test the screen before mounting in the case Let the dial solder joints cure before assembly See installation video for detailed guidance Compatibility: Nintendo Game Boy Classic DMG. Do not insert the same side of the cable at both ends into the cable holder. As shown below. Inserting a reverse cable like this will burn out the main chip of the LCD screen!!! If there is a button malfunction, please make sure that your GB motherboard is functioning properly. Then check if the four transistors on the key board of the LCD screen are soldered properly. When the dial is pressed and the battery level prompt bar is not displayed, it indicates that the battery level is low. Installation tutorials and precautions: Do not squeeze the LCD screen. Do not pull the LCD flat cable. Do not wipe the LCD screen. The welding of the dial is not very firm. Do not press the dial until the GB console housing is installed. To avoid the broken dial caused by the wrong direction of force. This PCB is used together with the 2.6 inch GB LCD screen. The LCD flat cable cannot be fully inserted, and the flat cable will tilt slightly. It does not affect the use. If the LCD screen displays white. Please reconnect this flat cable. Try to plug the flat cable correctly. Please test before installation Apply tape to the metal shell of the dial to avoid short circuits. There may be a short circuit here, causing the lid to close and the LCD screen to not start. The speaker cannot play sound, and in most cases, it is caused by rust and damage to the headphone jack. You can try short circuiting these two soldering points of the headphone jack.